User Guide

User Manual 64 Y1-03-0207 Rev. A
GPS Settings
The screen provides the means to switch the position pinning function of the internal GPS receiver
on and off. For vessels operating with SOG < 0,3 knots it is recommended to switch position pinning
off. Otherwise the internal GPS receiver may deliver wrong position information.
The data input field is fitted with the recommended default value (<on>). The M6 button is used for
toggling between the two modes of position pinning; the M5 button is used for saving the settings.
Attention: The system will be restarted after saving the settings.
Dynamic Keys: Sensor Settings
[M5] [Save] Save Data Input [M8] [Back]
Return to Menu
Configuration
[M6] [Change]
Change the
setting
N 1
o
20' E 0
o
13' |1>0.10|2>1.30| * 1L
************* GPS Settings *************
on/off
Position Pinning: [x]/[ ]
Note: The system will be restarted after
saving the settings.
----------------------------------------
| Save | Chan
g
e | | Back