User Guide

User Manual 59 Y1-03-0207 Rev. A
c) Alarm Settings
This screen allows the user to enable or disable the generation and display of Alarms. Alarms are
displayed in the Alarm Inbox (see Menu 5: Transponder Configuration, Submenu 3: Alarm Settings)
and on the ECDIS screen.
Note:
It is highly recommended to enable the Alarm Function.
Dynamic Keys: Alarm Settings
[M5] [Save] Save Alarm Settings [M8] [Back]
Return to Submenu
Configuration
[M6] [Change]
Configure Alarm
Generation (on/off)
N 1
o
19' E 0
o
12' |1>0.10|2>1.30|3>1.80nm
************ Alarm Settings ************
on/off
Alarm generation: [*]/[ ]
Note: This setting also affects output
on ECDIS port.
----------------------------------------
| Save | Change | | Back