User Guide

User Manual 8 Y1-03-0211 Rev. B
1.3 Entering Ship Settings
Select from the Main Menu “Ship Settings” Menu is USER password protected with default
password “NAUT”. Enter Password and use the up and down arrows to edit Ship Settings
then press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter ATIS Code / Call Sign.
Select and enter Ship Name.
Select and enter Length of Convoy (in m).
Select and enter Beam of Convoy (in m).
Select and enter Internal and External GPS antenna positions.
Select and enter Length of Ship (in dm).
Select and enter Beam of Ship (in dm).
N 1^23' E 0^16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1^19' E 0^12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
Atis Code :max. 7ASCII +------+
ShipName :Nauticast | |
Length(Conv):400m | A
Beam(Conv) :32m | |
RefPtExt :A380 B20 C8 D24m | x--|
RefPtInt :A380 B20 C8 D24m | | B
Length(ship):600dm | | |
Beam(ship) :220dm +-C-+D-
+
----------------------------------------
| Save | | | Back