User Guide

User Manual 71 Y1-03-0211 Rev. B
3.5.6 Service Configuration (Service Password Protected)
The Service Configuration Menu allows initial configuration of the Service Password,
Password Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICAST
to Factory Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a
higher security level than can be reached with the User Password and therefore ensures that
the Service Configuration is protected, and limited to authorized service personnel.
Note:
The default Service Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial NAUTICAST
operation!
Dynamic Keys: Service Configuration
[M5] [Select]
Confirm Submenu
Selection
[Enter]
Confirm Submenu
Selection
[M8] [Back]
Return to Main
Menu
N 1^21' E 0^14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Change DAC / ESN
| +- 5. Change AIS Mode
Msg. | +- 6. Restore Factory Settings
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back