User Guide

User Manual 66 Y1-03-0211 Rev. B
This screen allows the user to enable or disable the generation and display of Alarms.
Alarms are displayed in the Alarm Inbox (see Menu 5: Transponder Configuration, Submenu
3: Alarm Settings) and on the ECDIS screen.
Note:
It is highly recommended to enable the Alarm Function.
Dynamic Keys: Alarm Settings
[M5] [Save] Save Alarm Settings [Back]
Return to Submenu
Configuration
[M6] [Change]
Configure Alarm
Generation (on/off)
For detailed listing of the possible alarms could be found in paragraph 5.2.
N 1^19' E 0^12' |1>0.10|2>1.30|3>1.80nm
************ Alarm Settings ************
on/off
Alarm generation: [*]/[ ]
Note: This setting also affects output
on ECDIS port.
----------------------------------------
| Save | Change | | Back