User Guide

User Manual 60 Y1-03-0211 Rev. B
3.5.5 Transponder Configuration (User Password Protected)
The Configuration Menu allows the user to alter the hardware-based parameters. User
Password Configuration is also undertaken here.
Accessing the Configuration Settings:
The Configuration Menu is User Password protected.
Note:
The default User Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial NAUTICAST
operation!
Dynamic Keys: Transponder Configuration
[M5] [Select]
Select desired
Submenu
[M8] [Back]
Return to Main
Menu
N 1^22' E 0^15' |1> N/A|2>0.00|3>0.10nm
|----------------------------------
| 5. Transponder Configuration
-----| |
| +- 1. Change User Password
View | +- 2. Region Settings
| +- 3. Alarm Settings
-----| +- 4. Interrogation Settings
| +- 5. Sensor Settings
Msg. | +- 6 Inland AIS quality Info
|
-----|
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back