User Guide

User Manual 54 Y1-03-0211 Rev. B
Select Submenu 2 “Cargo/Voyage Settings” with cursor button [Up] & [Down] or by pressing
Nr. 2 on the keyboard.
Toggle the values for the ERI ship type (see Appendix), the hazardous cargo (number of
blue cones [0-3, 4=B-Flag, 5=default=unknown]) and the loaded / unloaded status.
Save the new settings by pressing [Save], and return to the Main Menu Screen by pressing
[Exit]. Press [Back] to return to the Main Menu without saving any changes.
Select Submenu 3 “Persons on Board” with cursor button [Up] & [Down] or by pressing Nr. 2
on the keyboard.
Note:
The total number of persons on board will b e calculated automatically. In “High Seas” mode
this sum will be used for the AIS messages.
The “Persons on Board” could be transmitted via addressed or broadcast message. The
following screen appears after the selection “Broadcast PoB message” by pressing M7.
N 1^18' E 0^12' |1>0.01|2>1.30|3>1.80nm
********* Cargo/Voyage Settings ********
ERI ship type :<Vessel type unknown>
Hazardous cargo:<default unknown>
Un/ Loaded :<loaded> / <unloaded>
----------------------------------------
| Save | | | Back
N 1^18' E 0^12' |1>0.01|2>1.30|3>1.80nm
************* PoB Settings *************
Crew Members:0-254 (255 = unknown = default)
Passenger :0-8190(8191= unknown = default)
S. Personal :0-254 (255 = unknown = default)
--------------------------
Total :nnnn Members
M6: Send addressed PoB Message
M7: Broadcast PoB Message
----------------------------------------
Num| Save |Addressed |Broadcast | Back