User Guide

User Manual 46 Y1-03-0211 Rev. B
i) Inbox of a received “Requested Time of Arrival” (RTA) Message
Upon selection of “7. Lock Reply” in the Message Menu, the received Reply to your ETA –
Message appears. The Message contains:
- The timestamp of this message in the format MM/DD hh:mm.
- The location code of the Lock
- The requested time of arrival at the lock in the format MMDDhhmm (month-day-hour-
minute).
- The status of the lock (operational / not operational).
Dynamic Keys: Broadcast Message Editor
[M8] [Back]
Return to Messages
Menu
j) Interrogate IFM
Within this menu the following message could be interrogated from another inland vessel:
FI10 Inland ship static and voyage related data
FI21 Estimated time of arrival at lock/bridge/terminal
FI55 Number of person on board
FI3 Capability request
To send an Interrogation the MMSI have to be specified by using the numeric keys and
specify the interrogation message within the selectable list. Press “send” to proceed. As far
the addressed transponder is in receiving range the specified message come back within a
few seconds.
N 1^22' E 0^16' |1> N/A|2>0.00|3>0.10nm
************* Lock Reply ***************
TimeStamp : MM/DD hh:mm
UN Country :
UN Location :
Fairway section:
Terminal code :
RTA(MMDDhhmm) :
Status :
----------------------------------------
| | | | Exit
N 1^22' E 0^16' |1> N/A|2>0.00|3>0.10nm
*********** Interrogate IFM ************
Dest MMSI : 203125004
Specific IFM:<Inland Ship&Voy rel. Data>
----------------------------------------
| | Send | | Exit