User Guide

User Manual 37 Y1-03-0211 Rev. B
e) Confirmation of Broadcast Sent Message
This Confirmation Screen shows that the message was successfully transmitted on the
Broadcast Setting. By pressing [Back] the user automatically returns to the Message Editor
for further Messaging. The [SendTo]
returns the user to the Vessel Listing, with the option of
further Message Writing to individual vessels.
In the case of failed transmission, the following screen appears. In this case, it is
recommended to retransmit the Broadcast Message.
N 1^19' E 0^13' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | | <
-
B
ack
N 1^19' E 0^13' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[-] Message could not be sent
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | |<-Back