User Guide

User Manual 106 Y1-03-0211 Rev. B
Sending an SRM Message:
Upon selection of a message, this screen shows the emergency information, which will be
sent and should be checked before transmission. To confirm message transmission to all
vessels within range it is necessary to activate either the [Send] or [SRM] button. The [Back]
button takes the user back to the Message Selection Menu without sending the message.
Dynamic Keys: Send SRM Message
[M5] [Send]
Send selected
SRM Message
[M8] [Back]
Return to SRM
Message
Selection
Confirmation of sent SRM:
Upon sending the SRM to all vessels the Broadcast Transmission Status is shown. The
Broadcast Transmission Status Screen shows confirmation of sent message and allows the
user to return to the Vessel Listing for further messaging to individual vessels.
Dynamic Keys: Confirmation of Broadcast SRM
[M6] [SendTo]
Return to Vessel
Listing for further
Messaging
[M8] [Back]
Return to SRM
Message View
N 1^22' E 0^16' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
-SRM----SRM----SRM----SRM----SRM----SRM-
Broadcast message
MAYDAY,DE,ANDREA DORIA,D11233,1193046,PO
S:N 1^22.658'_E 0^16.102'_UTC15:36 - F
IRE, EXPLOSION
************** Send SRM? ***************
----------------------------------------
| Send | | |<-Back
N 1^19' E 0^13' |1>0,10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | | <-Back