User Guide

Sub-Menu
Content
Fairway View Scale
Settings of the Geometry and Scale of the
Fairway View
Symbol Configuration
Symbol settings of the Fairway and Radar View (also
the minimized Views)
Other Graphical Settings
AIS-target filter settings; enabling / disabling the Auto
Zoom feature; Alarm appearance
Fairway View Scale
Dynamic Keys: Fairway View Scale
[M5]
[Save]
Save the settings
[M8]
[Back]
Return to
Graphical
Display Menu
Parameter description:
Parameter
Description
Angle(A)

Value range: 2° to 178°
Dim(B)
The parameter Dim(B) defines the width of the fairway in percent of
the horizontal line. Please ensure that Dim(C) has to be greater or
equal to Dim(B).
Value range: 10% to 100%
Dim(C)
The parameter Dim(C) defines the width of the fairway in percent of
 -          
-
to enter here 100%, additionally the parameter Dim(D) has to be set
to a value greater than zero.
Value range: 10% to 100%
Dim(D)
The parameter Dim(D) defines the height of the horizontal guidance
lines in percent of the display resolution (pixel). If you want to
       -   
horizontal guidance lines f´2) you have to enter the value 0%,
additionally the parameter Dim(C) has to be set to 100% (your
parameters will pass an internal value check while entering).
Value range: 10% to 70%
N53°31 E10° 1 |1>0.69|2>0.77|3>1.08nm
*********** Fairwayview Scale **********
Angle(A): 178°
Dim(B):50% Dim(C):100% Dim(D):20%
\ - A - / +- B -+
+ + / \
\ . / / \
/ \ / \
| | + - - C - - +-
| | | . |D
+---+ +-----/ \-----+-
----------------------------------------
NUM| Save | | | Back
Y1-03-0211G
81