User Guide

1.3 Entering Ship Settings
           . The default
password from the factory is mentioned on your AIS display at the protection foil. (see Appendix
7.3 for password information). Enter Password and use the up and down arrows to edit Ship
Settings then press Enter or the numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter Call Sign (ATIS).
Select and enter Ship Name.
Enter external GPS Antenna Position
Enter internal GPS Antenna Position
Enter ship len and beam in [dm]
Setting the Internal and External GPS Antenna Position.
Note: It is critical for the proper orientation of your ship to other AIS users to enter this data
accurately.
Example: Length of ship = 220m and Beam = 43m.
N 1
o
23' E 0
o
16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM|Select->| | |<-Back
N/A N/A |1> N/A|2> N/A|3> N/Anm
*********** Convoy Settings ************
Call Sign:OEZ1234 /\ +
ShipName :INLAND SHIP / \|
Ref.Points ext int | |
A: 200m 220m | A
B: 20m N/A | |
C: 10m 10m | +--|
D: 33m 33m | | B
Len (A+B): 220m 220m | | |
Beam(C+D): 43m 43m +-C-+D-+
Len [dm]: 2199dm
Beam [dm]: 429dm
>>> DATA OK. PRESS M5 TO SAVE DATA <<<
----------------------------------------
| Save | | | Back
8
Y1-03-0211G