User Guide

3.5.6 Service Configuration (Service Password Protected)
The Service Configuration Menu allows initial configuration of the Service Password, Password
Settings (on/off), MMSI/IMO Numbers and the option of resetting the NAUTICAST to Factory
Settings.
The Service Password is required in order to enter the Service Configuration Menu. This is a
higher security level than can be reached with the User Password and therefore ensures that the
Service Configuration is protected, and limited to authorized service personnel.
NOTE: Please see Appendix 7.3 for password information. It is strongly recommended to change
the service password immediately after commencing initial NAUTICAST operation!
Dynamic Keys: Service Configuration
[M5]
[Select]
Confirm Submenu
Selection
[Enter]
Confirm Submenu
Selection
[M8]
[Back]
Return to Main
Menu
After entering the Default Service Password (Please see Appendix 7.3 for password
information) in the password query, the Service Configuration Menu may be accessed. In this
menu it is possible to configure both the Service Password and the User Password Settings, as
well as input the MMSI/IMO Numbers and reset the to Factory Settings.
N 1
o
21' E 0
o
14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Change DAC / ESN
| +- 5. Change AIS Mode
Msg. | +- 6. Restore Factory Settings
|
-----|
|
Displ|
----------------------------------------
NUM| Select->| | |<-Back
N 1
o
24' E 0
o
17' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Service password protected!
Please enter service password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
60
Y1-03-0211G