User Guide
e) Sensor Settings
Within this service password protected menu the NAUTICAST offers the following configuration
options:
Set up data speed 4800/9600/38400 baud.
Monitor the connected sensor inputs for each sensor channel.
Verify and edit the Sensor Configuration on the display screen.
Analyze the information received from the connected sensor devices.
Produce an electronic installation report.
Configuration of various NMEA protocols.
Dynamic Keys: Sensor Settings
[M5]
[Save]
Save Data Input
[Up] /
[Down]
Select Data Field
for Configuration
[M6]
[Default]
Restor the default
settings
[Enter]
Select Data Field
for Configuration
[M7]
[Analyce]
Analye you NMEA
Data streem
[Left] /
[Right]
Configure Data
[M8]
[Back]
Return to Menu
Configuration
Use this menu to set up the data speed 4800/9600/38400 baud.
NOTE: This configuration should be done only by advanced users like installation technicians.
Therefore you will find more details in the installation manual.
During the configuration process, the NAUTICAST is not operational.
GPS Settings (Service Password protected)
GPS Module:
The NAUTICAST shows the inbuilt GPS Module now. It can be <µBlox><Jupiter>You can
module, other the internal GPS will not provide a position and your AIS can not operate correct.
Select and with the [Left] & [Right] arrows the option <SEARCH>to search which module is
installed Please mention the system will restart automatically when saving these setting later. .
N 1
o
19' E 0
o
12' |1> N/A|2>0.00|3>0.10nm
*********** Sensor Settings ************
BaudRate Sensor1:< 4800> CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
1>Start Monitor>
BaudRate Sensor2: 4800 CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
2>Start Monitor>
BaudRate Sensor3: 38400 CRC: auto
Ignored:$HC---$-----$-----$-----
$-----$-----$-----$-----
3>Start Monitor>
----------------------------------------
| Save | Default | Analyze | Back
58
Y1-03-0211G