Service manual

LUMISCAN ACR-2000 SERVICE MANUAL – SECTION 7.0 DIAGNOSTICS
7.3.2 SCANFILE
Scanfile using the following parameters:
Pixels per line : 2048
Pixel depth : 12 bits/pixel
Pixel format : LSB
LUT format : Normal
Filename : lsdt.img
The command line for "SCANFILE" has the following format:
SCANFILE /PPL: /PD: /PF: /LUT: /F: /TIF /AM /PMT /PPI /NOEDGE /EDGE
Options available are:
PIXELS PER LINE: Default is 1024
/PPL:x Set PIXELS PER LINE to x
PIXELS PER INCH
/PPI: pixels per inch
PIXEL DEPTH: Default is 12 bits
/PD:12 Set PIXEL DEPTH to 12 bits/pixel
/PD:8 Set PIXEL DEPTH to 8 bits/pixel
PIXEL FORMAT: Default is LSB first
/PF:LSB Set PIXEL FORMAT to LSB first
/PF:MSB Set PIXEL FORMAT to MSB first
LOOK UP TABLE: Default is Normal
/LUT:N Set LUT to normal - 0.0 Optical Density = 0
/LUT:I Set LUT to inverted - 0.0 Optical Density = 4095
OUTPUT FILE: Default is lsdt.img
/F:filename Set filename
Tiff File Format:
/TIF Set to create TIFF image file
Averaging Method
/AM: X or XY