Service manual

LUMISCAN ACR-2000 SERVICE MANUAL - INTRODUCTION
vii
SAFETY INFORMATION
Conventions
DANGER
A DANGER indicates that personal injury may occur if the user
does not perform the procedure correctly.
CAUTION
A CAUTION indicates that damage to the product may occur if
the user does not perform the procedure correctly.
PRECAUTION
A PRECAUTION indicates that inconvenience to the user, such
as loss of data, may occur if the user does not perform the
procedure correctly.
NOTE
A NOTE indicates the information that should be called to the
attention of the user.
Be sure to read and understand the installation and operating instructions before applying power to the
LUMISCAN ACR-2000.
Laser Safety
The LUMISCAN ACR-2000 incorporates a Red >15mw high-power solid-state laser diode. The
covers on the LUMISCAN ACR-2000 protect the user from direct exposure to laser light. These
covers will protect a user only if they are properly installed when the system is being used. Covers must
be removed and replaced by properly trained personnel. If the covers have been damaged during
shipment or in usage, contact your local service representative for replacement covers.
DANGER
THIS EQUIPMENT EMPLOYS A LASER. LASER
RADIATION MAY BE PRESENT IF THE LUMISCAN
ACR-2000 IS OPERATED WITHOUT COVERS.
AVOID LASER BEAM. DIRECT EYE EXPOSURE TO
LASER LIGHT MUST BE AVOIDED.