Specifications

Chapter 3 – Boat Systems
A.8.b. RB-S Panel One engine kill switch is installed between the ignition key switches for
both of the engines. The engine kill switch clip must be inserted in the
engine kill switch in order for the engines to start and run. The kill switch
is attached to an 18-inch lanyard that is attached to the operator’s PFD or
boat crew survival vest. Should the operator/coxswain fall away from the
controls, the engines will immediately stop.
Engine warning lights are mounted above the key switches on the switch
panel.
Figure 3-9
Key Switch Panel (RB-S)
3-11