Specifications

Chapter 3 – Boat Systems
.
A.7. Engine
Controls
The gearshift and throttle control (Figure 3-7) for both engines is located
on the starboard dash panel. Each lever controls engine RPM and ahead or
astern movement. Moving the throttle lever 35 degrees from neutral selects
the gear, forward or reverse, and further movement increases engine speed.
The port throttle lever contains the power trim/tilt switches for both
engines. These rocker-type switches, labeled UP and DN, change the angle
of the outboard motor to trim the boat for normal operation, shallow water
operation, beaching, launching, and mooring.
Figure 3-7
Gearshift and Throttle Control
3-9