Specifications

Disabling Casualty List
Engine
Parameters
• Engine Lube Oil Pressure:
Green Engine Oil Pressure Light extinguishes on ignition panel,
engine RPM is automatically limited to 1800 RPM.
• Engine Cooling Water:
Red overheating indicator illuminates on the ignition panel, or
audible alarm sounds, engine speed is automatically reduced to 1800
RPM. If condition continues for another 20 seconds, the engine
automatically shuts down.
Engineering
System
Components
• Engine fails to start.
• Uncontrollable overheating.
• Inoperative visual or audible alarms
• Metallic/non-metallic noise: metal-on-metal/fuel-knock/bearing/clicking.
• Excessive engine vibration.
• Any fuel (gasoline) system or engine component leaking or dripping fuel.
• Engine surging (over 50 RPM)
• Engine over speed (over 6000 RPM).
• Loss of engine control.
• Continuous electrical breaker trip.
• Continuous failure of outboard engine fuses.
• Steering system inoperative.
• Engine mount hardware loose or missing.
• Loose/missing propeller coupling nut.
• Loose/disconnected engine control hardware.
• Loose/disconnected steering actuator hardware.
Electronics/
Navigation
• No electronic means of signaling distress (i.e., no radio, EPIRB not
installed or unserviceable, etc.).
• 12-Volt system will not energize.