Specifications

Chapter 1 - Introduction
Section D. Action
Introduction
Operating and supervisory commands and boat crews will comply with the
procedures and limitations specified in this publication and any duly issued
changes.
D.1.
Configuration
Control
Configuration control for the Defender Class is critical for standardization of
equipment and safety of operations.
NOTE
NOTE
To maintain fleet-wide standardization, unit commanders shall not change or vary the
type or location of equipment carried except where noted. Design or structural alterations
are prohibited unless specifically authorized by the USCG Engineering Logistics Center
(ELC) and are in accordance with the Naval Engineering Manual, COMDTINST
M9000.6 (series).
Prototype testing of Defender Class configuration changes may only be carried out with
the specific authorization of the USCG ELC.
1-9