Specifications

NOTE
L.6 Trailer
Construction and
Equipment
The primary frame of the trailer is made up of 4 X 6-inch aluminum “I”-
beams. The suspension is a torsion axle system. The trailer is a six-wheel
configuration (three on each side) with one spare and an E-Z Jack. The
wheels are attached to the hub system.
The RB-HS uses conventional incandescent bulbs for trailer brake, tail, and
clearance lights. The RB-S uses LEDs for trailer brake, tail, and clearance
lights.
The E-Z Jack was designed as an easy-to-use, safe, and reliable device for
changing tires on tandem axle trailers. Its unique rocker shape allows trailer
operators to simply drive the trailer onto the E-Z Jack to elevate entire
trailer side of the tire to be changed.
Always use a designated “spotter” when hooking up the trailer. The spotter can provide
detailed instructions to the tow vehicle operator when backing up which will preven
t
damage to both the tow vehicle and trailer.