Specifications

Chapter 3 – Boat Systems
Section I. Seating System (RB-HS)
Introduction
Two suspension-mounted seats are located at the port and starboard console.
Bench seating is provided in the aft portion of the main cabin as well as in
the cuddy cabin.
I.1. Seats
The two suspension-mounted seats (Figure 3-59) have an overall width of 24
inches and a height adjustment of 3 inches. There is a 6-inch forward and aft
double-locking slide adjustment via a handle on the lower left portion of the
seat. The backrest is adjustable and the armrests fold up to allow easy
access. The seat back is contoured for lumbar support. The base is made of
mild steel with steel fasteners. The base is equipped with a heavy-duty
adjustable shock absorber designed for severe duty.
The bench seats are marine grade vinyl covered foam. The removable
cushions are fastened with heavy-duty Velcro and the permanent cushions
have a marine grade plastic incorporated to accommodate fastening screws.
NOTE
Regular maintenance of the seats must be performed in accordance with PMS to ensure
proper operation.
3-65