User Guide

Y1-03-0116 Rev. C

6) Set the PRC-77 to a transmit mode.

7) Turn the ACR/CC-1 ON and position it next to hand-set of the PRC-77, make sure

the microphone of the ACR/CC-1 is facing the microphone on the hand-set.

8) On the key pad, press button number 1, 2, or 3 to turn light(s) ON, or press button

number 4, 5, 6, or 7 to turn light(s) OFF (see Note 2).

Note 1: Pressing button number 7 on keypad will always turn OFF all lights

regardless of their code configuration.

Note 2: The codes on the ACR/L-32RC Remote Control and the ACR/L-32RCL

Remote Controlled Light are factory set to these values, however, other code

combinations are available. For further information, please refer to section number 5,

Customizing the Activation Code.

Figure 4

CC-1 Code Controller