User Guide

Y1-03-0116 Rev. C
7
Figure 5: ACR/L-32 / L-32 RC Combo
Remote Light System
C. Remote Controlled Activation of the ACR/L-32RCL unit (See Figure 6)
1) Insert the ACR/L-32RCL Remote Controlled Light directly into the battery.
2) Plug antenna onto banana plug.
3) Secure the complete assembly of the light, and battery together with the canvas hold
down strap and secure the light to the ground with a long nail or stake down pins.
4) At a remote location (up to 5'000 feet away from the lights), set the Field Radio (PRC-
77 or equivalent) to 46.75 MHz FM.
5) Turn on the CC-1 and position it to the mouthpiece of the Field Radio hand set.
(Position speaker of CC-1 to microphone of handset)
6) Press the desired code (an audible tone should be heard) then press the Push to Talk
switch to transmit the code. The light should react immediately.