User manual

GlobalWatch™ UAIS User Manual 61 Version 1.0
Sending an SRM Message:
Upon selection of a message, this screen shows the emergency information, which will be sent and should
be checked before transmission. To confirm message transmission to all vessels within range it is necessary
to activate either the
[Send] or [SRM] button. The [Back] button takes the user back to the Message
Selection Menu without sending the message.
Dynamic Keys: Send SRM Message
[M5] [Send]
Send selected
SRM Message
[M8] [Back]
Return to SRM
Message Selection
Confirmation of sent SRM:
Upon sending the SRM to all vessels the Broadcast Transmission Status is shown. The Broadcast
Transmission Status Screen shows confirmation of sent message and allows the user to return to the Vessel
Listing for further messaging to individual vessels.
Dynamic Keys: Confirmation of Broadcast SRM
[M5] [SendTo]
Return to Vessel
Listing for further
Messaging
[M8] [Back]
Return to SRM
Message View
N 1^22' E 0^16' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
-SRM----SRM----SRM----SRM----SRM----SRM-
Broadcast message
MAYDAY,DE,ANDREA DORIA,D11233,1193046,PO
S:N 1^22.658'_E 0^16.102'_UTC15:36 - F
IRE, EXPLOSION
************** Send SRM? ***************
----------------------------------------
| Send | | |<-Back
N 1^19' E 0^13' |1>0,10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | | <-Back
Y1-03-0178A