User manual

GlobalWatch™ UAIS User Manual 45 Version 1.0
Creating a New Region
Parameters for setting up a new Region can be entered and saved here.
Dynamic Keys: Initial User Password Setting
[M5] [Save]
Confirm Region
Data Input
[M8] [Back]
Return to Region
Listing
Inputting Region Settings: Mode of Latitude and Longitude Input:
Example: 44 Degrees, 13.1234 minutes, North
Input Format: N 44-13.1234
Input Modes for New Regions
Data Field Field Description Input Modus Additional Information
NE LAT(1) Latitude N/E corner Manual Input Degrees and minutes
NE LON(1) Longitude of N/E corner Manual Input Degrees and minutes
SW LAT(2) Latitude of S/W corner Manual Input Degrees and minutes
SW LON(2) Longitude of S/W corner Manual Input Degrees and minutes
TrZone(3) Transitional Zone Size <Selection> Nautical Miles
ChannAIS1 Primary AIS Channel Manual Input Channel Number
BandwAIS1 Bandwidth for Primary AIS Channel <Selection>
Default Setting as defined by the
channel number
ChannAIS2 Secondary AIS Channel Manual Input Channel Number
BandwAIS2
Bandwidth for Secondary AIS
Channel
<Selection>
Default Setting as defined by the
channel number
Tx/RxMode Channel Modes <Selection>
Tx : Transmitting Mode
Rx: Receiving Mode
VHF Power VHF Power Settings <Selection>
Low = 2 Watt
(Default for Ports)
High = 12,5 Watt (Default for High
Sea Regions)
N 1^19' E 0^12' |1>0.10|2>1.30|3>1.80nm
********** Create New Region ***********
NE LAT(1):N 0^ 0.0000' +----------1
NE LON(1):E 0^ 0.0000' | +------+ |
SW LAT(2):N 0^ 0.0000' | | | |
SW LON(2):E 0^ 0.0000' >|3|< | |
TrZone(3): 5nm | +------+ |
ChannAIS1:2087 2----------+
BandwAIS1: Default
ChannAIS2:2088
BandwAIS2: Default
Tx/RxMode: TxA/TxB,RxA/RxB
VHF Power: High
----------------------------------------
| Save | | | Back
Y1-03-0178A