User manual

GlobalWatch™ UAIS User Manual 36 Version 1.0
3.5.4 Ship Settings (User Password Protected)
After a new User Password has been set, the Ship Settings may be input. The Ship Settings are
usually only set once, upon GlobalWatch™ UAIS initial operation.
A selection is made with the cursor buttons
[Up] or [Down] for input field selection. The category
“ShipType” is equipped with default settings, which can be selected by pressing the
[Left] or [Right]
buttons.
Note:
The default User Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Ship Settings for initial GlobalWatch™ UAIS operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the User Password has been set, Ship Settings may be input.
Dynamic Keys: Input of Ship Settings
[M5] [Save]
Confirm Data Input
[M8] [Back]
Return to Main
Menu
LAT:N 1-18'54" ExtSOG:34.6kn 11/05/2002
LON:E 0-12'21" IntCOG:173.0 09:46:36
Ships:21 A/ IntGPS: 3D Region6
************ Ship Settings *************
/\ +
CallSign:D11233 / \|
ShipName:ANDREA DORIA | |
Length :220m | A
Beam :43m | x--+
RefPtExt:A200 B20 C10 D33m | | B
RefPtInt:A190 B30 C20 D23m +-C-+D-+
ShipType: Pilot vessel
----------------------------------------
|
Save
|
|
|
Back
Y1-03-0178A