User manual

GlobalWatch™ UAIS User Manual 33 Version 1.0
3.5.3 Voyage Settings (User Password Protected)
Note:
The default User Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Voyage Related Data for initial GlobalWatch™ UAIS operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the Voyage Settings have been input and saved, this screen appears.
[Exit] takes the user back to the Main Menu.
Dynamic Keys: Voyage Settings (User Password Protected)
[M5] [Enter]
Confirm Password
Input
[M8] [Exit]
Return to Vessel
Listing
N 1^31' E 0^24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
N 1^30' E 0^24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Data saved.
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | | | <-Exit
Y1-03-0178A