User manual

GlobalWatch™ UAIS User Manual 20 Version 1.0
e) Confirmation of Broadcast Sent Message
This Confirmation Screen shows that the message was successfully transmitted on the Broadcast Setting.
By pressing
[Back] the user automatically returns to the Message Editor for further Messaging. The
[SendTo] returns the user to the Vessel Listing, with the option of further Message Writing to individual
vessels.
In the case of failed transmission, the following screen appears. In this case, it is recommended to retransmit
the Broadcast Message.
N 1^19' E 0^13' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[+] OK, broadcast successful
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | | <-Back
N 1^19' E 0^13' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Broadcast Transmission Status
[-] Message could not be sent
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | Send To | |<-Back
Y1-03-0178A