User manual

GlobalWatch™ UAIS User Manual 16 Version 1.0
b) Using the GlobalWatch™ UAIS Message Editor
After selecting a vessel, the Message Editor is automatically displayed.
Messages containing a maximum of 156 characters are allowed. Longer texts require a second message.
After text input completion, transmission to the selected addressee is facilitated by pressing the
[Send]
button. The
[<Back] button leads to the Message Editor for writing a second message to the same
addressee. A second activation of the
[<Back] button leads to the Vessel Listing and allows selection of
another addressee.
It is possible to select the desired channel by pressing the
[<Channel>] buttons.
The default setting for Addressed Messages is (
auto) in contrast to Broadcasted Messages, where the
default setting is set at Channels A+B (AIS1 + AIS2).
Dynamic Keys: Addressed Message Editor
[M5] [Send]
Send Message
[Enter]
Send Message
[M6] [Channel]
Select Transmission
Channel
[M7] [Channel]
Select Transmission
Channel
[M8] [Back]
Return to Vessel
Listing
N 1^20' E 0^13' |1>0.10|2>1.30|3>1.80nm
************ Write Message *************
Addressed SRM 129
SendTo:5004 (DOREEN)
Text:TEXT INPUT IS POSSIBLE HERE
----------------------------------------
auto/ A / B /A+B
Channel: [*]/[ ]/[ ]/[ ]
----------------------------------------
| Send |<Channel |Channel> | Back
Y1-03-0178A