Instruction manual

46
Step 9
Swing the movable bracket clear and remove the
motor.
9.2.2 Rotor and motor replacement HE
Step 1
Using a pozidrive screwdriver undo screws
securing the grille and remove. Remove 4 screws
securing the top of the case and remove. Slacken
two hinging bolts on both ends. Remove three
bolts securing the access plate. Carefully hinge
down the access plate. Note Take the weight as
access plate swings down.
Step 2
Remove 6 screws securing access panel and
carefully remove panel.
Step 3
Remove 8 bolts securing wheel assembly.
Step 4
Turn retaining latch to release chassis.
Step 5
Holding handle, carefully pull motor and air wheel
assembly forward.
Step 6
Remove screw securing rotor bearing plate.
Repeat for opposite side.
Step 7
Slacken grub screw securing rotors to the motor
shaft, remove rotor.
Repeat for opposite rotor.
Movable bracket