Instruction manual

9.1.1 Electrical element replacement

SE.

Step 1

Using a 4mm Allen key slacken the M6 Allen

screws at the side of the grille. Access to the

inside of the air curtain grille can be made. Open

the grille. The grille is hinged to prevent the inner

frame from dropping.

Step 2

Disconnect element wires and if necessary

remove cut-off plate fixing screws.

Step 3

Remove element top fixing screws. Locate and

remove element fixing screws by inserting a

screwdriver through the hole indicated below.

Step 4

Lift out element cartridge, replace as required.

9.1.2 Electrical element replacement

HE.

Step 1

Using a 4mm Allen key slacken screws securing

the grille. Remove 4 screws securing the top of the

case and remove. Slacken two hinging bolts on

both ends. Remove three bolts securing the access

plate. Carefully hinge down the access plate. Note:

Take the weight as access plate swings down.

Step 2

Carefully remove connections to the elements,

noting wiring configuration.

Step 3

Remove two bolts securing elements.

Step 4

Lift out element cartridge, replace as required.

9. Parts replacement.