Instruction manual

After fitting the product in the ceiling recess and

adjusting the height to ensure that the grille sits

flush to the ceiling (when re-fitted) take the grille

assembly and refit using the screws removed

during Step 5.

5.4 Installation details -

AC-ACR-PANEL programmer

The Electronic base unit is pre-installed inside the

air curtain. All the external electrical connections

are via screw terminals onto this base unit.

The program keypad is installed on a separate

facia plate and connected to a surface mounted

back box in a suitable location. Please see fig 5.

Alternatively, the program panel can be flush wall

mounted with the addition of a suitable conduit

box MK part number 861 ZIC or equivalent.

The distance between the base unit and the

program panel can be up to 50m maximum.

5.5 Installation details -

Option SmartElec2 Controller

The SmartElec2 base unit is pre-installed inside the

air curtain. All the external electrical connections

are via screw terminals onto this base unit.

The SmartElec2 program panel is installed in a

separate housing and connected to a surface

mounted back box in a suitable location. Please

see fig 7.

Alternatively, the program panel can be flush wall

mounted with the addition of a suitable conduit box

MK part number 892 ALM or equivalent.

The distance between the base unit and the

program panel can be up to 100m maximum.

Cable

Entries

13.35

43.5

87.0

60.3crs

Fig. 5. Surface mount location holes.

Fig. 6. Alternative conduit box

Fig. 7. Surface mount location holes.

Fig. 8. Alternative conduit box

20 crs

3380 crs

4 Holes Ø5mm

Cable/plug

Entry