Instruction manual
2
Document Index.
1 Installation Requirements
1.1 Introduction
1.2 General
1.3 Electrical Supply
1.3.1 Electronic Controller
1.3.2 SmartElec2 Controller
1.4 Location
1.5 Clearance Distance
1.6 Health and Safety
1.7 Standards
2 Dimensions
2.1 ACR Air Curtain
2.2 Electronic Controller
2.3 Optional SmartElec2 Controller
3 Technical Specifications
3.1 Electrical Heated, Std Capacity 6&9kW 1P
3.2 Electrical Heated, Std Capacity 9-18kW
3.3 Electrical Heated, High Capacity 12-18kW
3.4 Ambient, Std Capacity
3.5 Ambient, High Capacity
3.6 LPHW, Std Capacity
3.7 LPHW, High Capacity
3.8 Electronic Controller
3.9 SmartElec2 Controller
4 Wiring Diagrams
4.1 Installer Wiring Electrically Heated 6&9kW 1Pha
4.2 Installer Wiring Electrically Heated 9&12kW 3Pha
4.3 Installer Wiring Electrically Heated 18kW 3Pha
4.4 Installer Wiring Ambient
4.5 Installer Wiring LPHW
4.6 Factory Wiring Electrically Heated ACR100/150 6&9kW 1Pha
4.7 Factory Wiring Electrically Heated ACR200 9kW 1Pha
4.8 Factory Wiring Electrically Heated ACR100/150 9&12kW 3Pha
4.9 Factory Wiring Electrically Heated ACR120 12kW 3Pha
4.10 Factory Wiring Electrically Heated ACR200/180 18kW 3Pha
4.11 Factory Wiring Ambient ACR100/150 1Pha
4.12 Factory Wiring Ambient ACR200/120/180 1Pha
4.13 Factory Wiring LPHW ACR100/150 1Pha
4.14 Factory Wiring LPHW ACR200/120/180 1Pha
4.15 Network Wiring Electronic Controller
4.16 Installer Wiring SmartElec2 Controller
4.17 Factory Wiring SmartElec2 Controller ACR100/150
4.18 Factory Wiring SmartElec2 Controller ACR200
4.19 Network Wiring SmartElec2 Controller
5 Installation Details
5.1 Mounting
5.2 Electrical Supply
5.3 Installation
5.4 Standard Controller
5.5 Option SmartElec2 Controller
5.6 LPHW only
5.7 Wiring
6 Servicing & Maintenance Instructions
7 Spare Parts
7.1 General
7.2 AC-ACR-PANEL Controller
7.3 SmartElec2 Controller
7.4 Heating mediums
8 Fault Finding Guide
8.1 General
8.2 Electrical Heated
8.3 Electronic Controller
8.4 Optional SmartElec2 Controller
8.4.1 Fault Code chart
8.4.2 LED indication
9 Replacing Parts
9.1 Electrical Element
9.1.1 SE
9.1.2 HE
9.2 Rotor and Motor
9.2.1 SE
9.2.2 HE
9.3 LPHW Coil
10 User and Operating Instructions
10.1 Standard Keypad
10.1.1 Keypad Buttons
10.1.2 Operation
10.1.3 Engineers Settings
10.1.3.1 Auto Mode
10.1.3.2 Door Switch Mode
10.2 Optional SmartElec2 Controller
10.2.1 Keypad Buttons
10.2.2 Keypad Display
10.2.2.1 Normal Mode Display
10.2.2.2 Normal Operation
10.2.3 Off Mode
10.2.4 Settings Mode
10.2.4.1 Activate Settings Display
10.2.4.2 Settings Display
10.2.5 Set Up Configuration
10.2.5.1 Set Fan Speed
10.2.5.2 Set Heat
10.2.5.3 Set Temperature
10.2.5.4 Networked Air Curtains
10.2.6 Engineers Settings
10.2.6.1 Door Link Settings
10.2.6.2 Link-group Interlock
10.2.6.3 All Air Curtains
10.2.6.4 External Temperature
10.2.6.5 External Temperature Offset
10.2.6.6 Temperature Limits
10.2.7 Power-up Manual Reset
10.2.8 Air Curtain Addressing
10.2.9 Keypad Sequences