User manual

User Manual 85 Y1-03-0203 Rev.K
Fairway View Scale
Dynamic Keys: Fairway View Scale
[M5] [Save] Save the settings [M8] [Back]
Return to
Graphical
Display Menu
Parameter description:
Parameter Description
Angle(A) The angle α defines the visible sector.
Value range: 2° to 178°
Dim(B) The parameter Dim(B) defines the width of the fairway in percent of
the horizontal line. Please ensure that Dim(C) has to be greater or
equal to Dim(B).
Value range: 10% to 100%
Dim(C) The parameter Dim(C) defines the width of the fairway in percent of
the „Zero-line“ (the horizontal line of the own ship position). If you
want to choose a width greater than the visible “Zero-line” you have
to enter here 100%, additionally the parameter Dim(D) has to be set
to a value greater than zero.
Value range: 10% to 100%
Dim(D) The parameter Dim(D) defines the height of the horizontal guidance
lines in percent of the display resolution (pixel). If you want to
choose a width greater than the visible “Zero-line” (refer to the
horizontal guidance lines f´2) you have to enter the value 0%,
additionally the parameter Dim(C) has to be set to 100% (your
parameters will pass an internal value check while entering).
Value range: 10% to 70%
N53
°
31 E10
°
1 |1>0.69|2>0.77|3>1.08nm
*********** Fairwayview Scale **********
Angle(A): 178°
Dim(B):50% Dim(C):100% Dim(D):20%
\ - A - / +- B -+
+ + / \
\ . / / \
/ \ / \
| | + - - C - - +-
| | | . |D
+---+ +-----/ \-----+-
----------------------------------------
NUM| Save | | | Back