User manual

User Manual 62 Y1-03-0203 Rev.K

Dynamic Keys: Sensor Settings

[M5] [Save] Save Data Input

[Up] /

[Down]

Select Data Field

for Configuration

[M6] [Default]

Restore the

default settings

[Enter]

Select Data Field

for Configuration

[M7] [Analyce]

Analye you NMEA

Data streem

[Left] /

[Right]

Configure Data

[M8] [Back]

Return to Menu

Configuration

Use this menu to set up the data speed 4800/9600/38400 baud.

Note:

This Configuration should be done from advanced user like installation technicians only. Therefore

you will find more details in the installation manual.

During the configuration process, the NAUTICAST is not operational.

N 1

19' E 0

12' |1> N/A|2>0.00|3>0.10nm

*********** Sensor Settings ************

BaudRate Sensor1:< 4800> CRC: auto

Ignored:$HC---$-----$-----$-----

$-----$-----$-----$-----

1>Start Monitor>

BaudRate Sensor2: 4800 CRC: auto

Ignored:$HC---$-----$-----$-----

$-----$-----$-----$-----

2>Start Monitor>

BaudRate Sensor3: 38400 CRC: auto

Ignored:$HC---$-----$-----$-----

$-----$-----$-----$-----

3>Start Monitor>

----------------------------------------

| Save | Default | Analyze | Back