User manual

User Manual 48 Y1-03-0203 Rev.K
3.5.4 Ship Settings (User Password Protected)
After a new User Password has been set, the Ship Settings may be input. The Ship Settings are
usually only set once, upon NAUTICAST initial operation.
A selection is made with the cursor buttons [Up]
or [Down] for input field selection. The category
“ShipType” is equipped with default settings, which can be selected by pressing the [Left] or [Right]
buttons.
Note:
The default User Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Ship Settings for initial NAUTICAST operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the User Password has been set, Ship Settings may be input.
Dynamic Keys: Input of Ship Settings
[M5] [Save] Confirm Data Input [M8] [Back]
Return to Main
Menu
LAT:N 1
o
18'54" ExtSOG:34.6kn 05/05/2006
LON:E 0
o
12'21" ExtCOG:173.0 09:46:36
Ships:21 A/ IntGPS: 3D Region6
************ Ship Settings *************
/\ +
CallSign:D11233 / \|
ShipName:ANDREA DORIA | |
Length :220m | A
Beam :43m | x--+
RefPtExt:A200 B20 C10 D33m | | B
RefPtInt:A190 B30 C20 D23m +-C-+D-+
ShipType: Pilot vessel
----------------------------------------
|
Save
|
|
|
Back