User manual

User Manual 45 Y1-03-0203 Rev.K
3.5.3 Voyage Settings (User Password Protected)
Note:
The default User Password is set at “NAUT”
It is strongly recommended to change it immediately after commencing initial transponder operation!
Before entering Voyage Related Data for initial NAUTICAST operation, it is advised to configure the
User Password in:
Menu 5: Configuration
Submenu 1: Change User Password
After the Voyage Settings have been input and saved, this screen appears.
[Exit] takes the user back to the Main Menu.
Dynamic Keys: Voyage Settings (User Password Protected)
[M5] [Enter]
Confirm Password
Input
[M8] [Exit]
Return to Vessel
Listing
N 1
o
31' E 0
o
24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
User password protected!
Please enter user password:
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| Enter | | | Exit
N 1
o
30' E 0
o
24' |1>0.10|2>1.30|3>1.80nm
----------------------------------------
++++++++++++++++++++++++++++++++++++++++
Data saved.
++++++++++++++++++++++++++++++++++++++++
----------------------------------------
| | | | <-Exit