Product Manual

8 Y1-03-0171 Rev. A
Vessel name
The SART label has a space where you should mark the vessel name (see Figure 3). This can be
done as follows . . .
Using an indelible pen
With an indelible pen, you can write the vessel name directly onto the SART. Note however,
that some indelible inks will fade when exposed to strong sunlight, so an ultra-violet resistant
pen is recommended.
If the full vessel name will not fit in the space provided this does not matter. Use a recognized
abbreviation or the vessel's call sign instead.
Life raft stowage
The SART can either be stowed in a life raft or lifeboat or it can be installed next to an
emergency exit for carriage to the life raft in an emergency.
For life raft stowage the SART should be positioned for easy access in an emergency. If the
SART is hidden from view then clear labels should be used to show its position. For inflatable
life rafts the mounting bracket should be discarded to avoid the risk of damaging the life raft.
Activation
Remove the SART from the bracket.
DO NOT…
· Tie Lanyard to vessel
· Cover or obscure SART
· Apply paint to SART
Vessel Name Here
Figure 3
Name/Vessel Registration
Nom/Enregistrement De Navire