Specifications

25-62-30
Page 45 of 84
May 03/13
ARTEX PRODUCTS / ACR ELECTRONICS, INC
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
ME406 (453-6603), ME406HM (453-6604)
REMOVAL
TASK 25-62-30-010-801
1. ELT
SUBTASK 25-62-30-010-001
A. ELT Removal
(1) See Figure 11 ELT Removal Sequence.
Figure 11 ELT Removal Sequence
(2) Disconnect the antenna coax cable.
NOTE
: Check the coax cable center conductor pin which is prone to retracting into the
connector housing.
(3) Remove remote switch harness D-sub plug.
(4) Open the velcro or metal strap.
(5) Slide the ELT up and out, and away from the mounting tray.
MOUNTING
TRAY ASSY
ELT MAIN
ASSEMBLY
1
2
3
4
DISCONNECT COAX
DISCONNECT HARNESS
UNDO VELCRO STRAP
(STRAP SHOWN IN
CLOSED POSITION)
NOTE: Coax cable and
wiring harness not
shown for clarity.
MOUNTING
TRAY ASSY
ELT MAIN
ASSEMBLY
1
2
3
4
DISCONNECT COAX
DISCONNECT HARNESS
UNDO METAL STRAP
(STRAP SHOWN IN
CLOSED POSITION)
NOTE: Coax cable and
wiring harness not
shown for clarity.