Owner manual

ACR Electronics, Inc. 570-0049 Revision B
The information within this document and any attached materials is proprietary and confidential
and is not to be disseminated, distributed, or otherwise conveyed throughout your organization to
employees without a need for this information or to any third parties without the express written
permission of ACR Electronics, Inc.
Page 8 of 30
QUANTITY
PART NUMBER
DESCRIPTION
455-0049
Pack List, 2-Wire ELT/RSWT Interface
2 ea.
120-4007
Diode, 1N4007
1 ea.
140-3349
Switch, DPDT W/LED Tip 2-Pos.
1 ea.
455-0032
Pack List, 2-Wire RSWT Interface 453-0032
1 ea.
455-0041
Pack List, 2-Wire ELT Interface 453-0041
1 ea.
570-0049
Manual, 2-Wire RSWT Interface 455-0032 & ELT
Interface 455-0041
1 ea.
591-0037
Label, Toggle Switch Horizontal
1 ea.
591-0092
Label, Toggle Switch
NOTES: For a new installation, the hardware required to connect the wires to the ELT end is
included in the pack list during the purchase of the beacon.
For an existing installation using an Artex ELT, you can purchase the Installation Kit
based on the ELT series of the beacon that you have if you do not have the necessary hardware
on hand already.
Table 1: Installation Kits
ELT SERIES
INSTALLATION KIT PART NUMBER
110-4, 100HM, 110-6
455-7004
C406-1, C406-1HM
C406-2, C406-2HM
G406-1, G406-2
G406-4, G406-4HM
B406-4,
455-7421
C406-N, C406-N HM
455-7422
ME406, ME406HM, ME406P
455-7423