Instructions / Assembly

Connecting the check valve
Connect the discharge pipe (1) to the elbow (2), union (3),
check valve (4),and gate valve (5.)
3.
3
OPERATION
Connecting power
Plug the pump power cord plug into the piggyback switchplug outlet.
Plug the switch plug into a 115V GFCI power outlet.
Allow pump to operate through several on-off cycles.
Operating the pump
When the float switch (1) moves up over the top of thepump, the pump
begins to operate. When the water lowersto a certain level, the float
switch (1) will turn the pump off.
1.
2.
1
2
INSTALLATION INSTRUCTIONS