Owner’s Manual Contents Model Identification............................ 2 Precautions to avoid possible exposure to excessive microwave energy.............. 3 Important safety instructions............................ 3 Commercial Microwave Oven Keep these instructions for future reference. If the oven changes ownership, this manual must accompany oven. Installation ......................................... 5 Earthing Instructions.......................... 5 Electronic Control Operation..............
Model Identification When contacting ACP, provide product information. Product information is located on oven serial plate which is located on the back side of the oven.
IMPORTANT SAFETY INSTRUCTIONS Recognize this symbol as a SAFETY message ! WARNING When using electrical equipment, basic safety precautions should be followed to reduce the risk of burns, electrical shock, fire, or injury to persons. 1. READ all instructions before using equipment. 9. DO NOT heat baby bottles in oven. 2. READ AND FOLLOW the specific “PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO EXCESSIVE MICROWAVE ENERGY” on this page. 10.
IMPORTANT SAFETY INSTRUCTIONS WARNING WARNING To avoid risk of fire in the oven cavity: a. DO NOT overcook food. Carefully attend oven when paper, plastic, or other combustible materials are placed inside the oven to facilitate cooking. b. Remove wire twist-ties from paper or plastic bags before placing bag in oven. c. If materials inside the oven ignite, keep oven door CLOSED, turn oven off and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. d.
Installation WARNING Unpacking Oven • • • • Inspect oven for damage such as dents in door or inside oven cavity. Report any dents or breakage to source of purchase immediately. Do not attempt to use oven if damaged. Remove all materials from oven interior. If oven has been stored in extremely cold area, wait a few hours before connecting power. Radio Interference Microwave operation may cause interference to radio, television, or a similar oven.
Electronic Control Operation So...how do I use it? 1. Power Up “-- -- ” displays when the oven is powered up for the first time. If Mode. key is pressed, the oven will change to Idle Note: In Idle mode, no key can be pressed. 2. Idle Mode (1) 1)The oven will enter Idle Mode after a set number of seconds have expired in Ready Mode without a keypad pressed or without the door being opened and closed. The default number of seconds is 60 and maybe changed by resetting User Option 4.
Electronic Control Operation 5. Pause Mode 1) This mode allow users to temporarily stop the cooking cycle to inspect or stir the food item. 2) While in Time Entry Mode or Preset Program Cook Mode, if the door is open and closed, or if the pressed, the oven will enter Pause Mode. key is 3) While paused, LED will display the remaining cooking time. 4) Pause Mode will expire back to Idle Mode in the exact fashion as Ready Mode, dependent on User Option 61.
Electronic Control Operation 11. Programming Mode will not be lost. 1) This mode allows the user to assign cook times and power levels to the keypad number keys. 2. Pressing key returns the oven to Ready Mode and cancels entered settings 2) Open the door and press Number Key 1 for 5 seconds. The buzzer sounds once to indicate Programming Mode is activiated. 12. Double Quantity Cooking 3) LED displays “ProG”. 2) Press X2 key and then Preset Program Number(s) 0-9 with in 5 seconds.
Electronic Control Operation Step 6: Press Example: To set the buzzer or key beep volume to medium, Press Number Key “2“ “OP:22” displays. key, LED displays “S-2”. Step 7: Press Number Keys “5”, “4”,”0” button, LED displays “5:40” . To change, repeat pressing “2” LED displays “OP:20”, “OP:21” ”OP:22” ”OP:23” etc. Step 8: Press “ ”keyto input 50% power, LED displays “PL5”. The second stage is finished. 5) Press key to save the selected setting.
Dial Operation So...how do I use it? Heating Menu Guide 2:00 :15 1:00-2:00 :45 :30 1:30-2:30 1. Open oven door, place food in oven, and close oven door. 2. Turn time entry knob clockwise to desired time. • Cooking time can be set up to 6 minutes. • Oven begins operation and time counts down. 3. When cooking time has elapsed, microwave energy stops and oven signal sounds. Interrupting Operation Open oven door to interrupt operation or turn time entry knob counterclockwise to “0”.
Care and Cleaning ! WARNING To avoid electrical shock which can cause severe personal injury or death, unplug power cord or open circuit breaker to oven before cleaning or removing light bulb. DO NOT power spray PART No metal pans CARE AND CLEANING RECOMMENDATION Interior, Exterior, and Door Clean microwave oven with mild detergent in warm water using soft sponge or cloth. Wring sponge or cloth to remove excess water before wiping equipment.
Before Calling for Service ! WARNING To avoid electrical shock which can cause severe personal injury or death, do not remove outer case at any time. Only an authorized ACP servicer should remove outer case. Troubleshooting Complaint Dim oven light Steam forms on oven door Hot air expelled from vents Oven does not start. Possible Cause Cooking at low power level. When cooking foods in a microwave steam is generated. Foods cooking in a microwave may release heat.
