Owner`s manual

Programming Items

1. Press and hold pad 1 for approximately 5 seconds.

2. Press pad to be reprogrammed.

3. Enter cooking time by using the number pads.

4. Press POWER LEVEL pad to program level of microwave power if

desired.

• For a lower microwave power, press pads 1 (for 10%),

through 9 (for 90%), or 0 for no microwave energy.

NOTE: Press POWER LEVEL pad twice to return to 100% microwave

power.

5. Press TIME ENTRY pad to add up to four additional cooking stages.

• Maximum cooking time cannot exceed 10 minutes per user

options.

• Total cooking time factory setting is 5 minutes.

• Enter cook time and power level as in steps 4 and 5.

6. Press START pad to set new programming changes to the pad.

NOTE: To discard changes, press STOP pad or close oven door.

7. Press STOP to exit programming mode.

Programming the Oven Control