User`s manual

84
A
NLITE and AHCI Installation Guide
AHCI
TheinstallationstepsbelowwillguideyouinconguringyourSATAdrivetoAHCI
mode.
1. EntertheBIOSutilityandconguretheSATAcontrollertoIDEmode.
2. Install Windows XP but do not press F6.
3. Download relevant RAID/AHCI driver les supported by the motherboard
chipset from Intel’s website.
Transfer the downloaded
driverlestoC:\AHCI.
4. Open Device Manager and
right click on one of the In-
tel Serial ATA Storage Con-
trollers, then select Update
Driver.
If the controller you select-
ed did not work, try select-
ing another one.