User`s manual
Table Of Contents
- Copyright
- Trademarks
- FCC and DOC Statement on Class B
- Table of Contents
- About this Manual
- Warranty
- Static Electricity Precautions
- Safety Measures
- About the Package
- Chapter 1 - Introduction
- Chapter 2 - Hardware Installation
- Chapter 3 - BIOS Setup
- Chapter 4 - Supported Software
- Appendix A - NLITE and AHCI Installation Guide
- Appendix B - Watchdog Sample Code
- Appendix C - System Error Message
- Appendix D - Troubleshooting
56
3
BIOS Setup
Exit
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
BIOS SETUP UTILITY
Chipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot SecurityMain Advanced PCIPnP
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit
Save Changes and Exit
To save the changes and exit the Setup utility, select this eld then press <En-
ter>. A dialog box will appear. Conrm by selecting OK.
You can also press <F10> to save and exit Setup.
Exit system setup
after saving the
changes.
F10 key can be used
for this operation.
BIOS SETUP UTILITY
Chipset
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot SecurityMain Advanced PCIPnP
Exit Options
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults
Load Failsafe Defaults
Exit
Save conguration changes and exit setup?
[Cancel][Ok]