User`s manual

55
3
BIOS Setup
South Bridge Configuration
Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← Select Screen
↑↓ Select Item
+
-
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
South Bridge Chipset Conguration
USB Functions [8 USB Ports]
USB 2.0 Controller [Enabled]
GbE Controller [Enabled]
GbE LAN Boot [Disabled]
GbE Wake Up From S5 [Disabled]
HDA Controller [Enabled]
PCIE Ports Conguration
PCIE Port 0 [Auto]
PCIE Port 1 [Auto]
PCIE Port 2 [Auto]
PCIE Port 3 [Auto]
PCIE Port 4 [Auto]
PCIE Port0-4 Conguration [4 x1s]
Chipset
Options
USB Functions
Selects the number of USB ports you want enabled.
USB 2.0 Controller
This eld is used to enable or disable USB 2.0
GbE Controller
Enables or disables the GbE controller.
GbE LAN Boot
Enable this eld if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM’s settings, type the <Shift> and <F10> keys simultaneous-
ly when prompted during boot-up. Take note: you will be able to access the boot
ROM’s program (by typing <Shift> + <F10>) only when this eld is enabled.
GbE Wake Up From S5
When enabled, it allows the system to wake up from S5 via the network LAN.
HDA Controller
Enables or disables the HDA controller.
PCIE Ports Conguration
Enables or disables the PCIE ports