Operation Manual

Unpacking Oven

• Inspect oven for damage such as dents in door or

dents inside oven cavity.

• Report any dents or breakage to source of purchase

immediately. Do not attempt to use oven if damaged.

• Remove all materials from oven interior.

• If oven has been stored in extremely cold area, wait a

few hours before connecting power.

Radio Interference

Microwave operation may cause interference to radio,

television. Reduce or eliminate interference by doing the

following:

• Clean door and sealing surfaces of oven according to

instructions in “Care and Cleaning” section.

Oven Placement

• Do not install oven next to or above source of heat,

such as pizza oven or deep fat fryer. This could cause

microwave oven to operate improperly and could

shorten life of electrical parts.

• Do not block or obstruct oven lter. Allow access for

cleaning.

• Install oven on level countertop surface.

Installation

A—For North American (UL/CSA) models, allow at least

2” (5.1 cm) of clearance around top of oven. Proper

air ow around oven cools electrical components.

With restricted air ow, oven may not operate

properly and life of electrical parts is reduced.

B—There is not an installation clearance requirement for

the back of the oven.

C—Allow at least 1” (2.54 cm) of clearance around sides

of oven.

D—Install combination oven so oven bottom is at least 3

feet (91.5 cm) above oor.