Operation Manual

25
Display and Features (cont’d)
Start pad
The Start pad is
used to begin a
manual time entry cooking cycle.
Temperature warnings
The combination oven has two
distinct temperature warnings.
Warnings sound with a three beep
signal when a programmed pad is
pressed. Warnings are:
• A warning when the preheat
temperature does not match the
preprogrammed temperature of
a cooking condition.
• A warning when the actual
oven cavity temperature is not
to preheat temperature, such
as when the oven is rst
started.
To override the warning and begin
a cooking cycle, press the Start
pad. To turn o warnings, see
User
Options
section.
Stop/Reset
pad
The Stop/Reset pad
stops a cooking sequence in
progress, clears out any remaining
time, and also ends a
programming or user option cycle.
When the Stop/Reset pad is used
to end a programming or option
change, the changes are
discarded.
Cooking Display
DISPLAYS DESCRIPTION
OVEN
PREHEATING
230°C
Oven Preheating 230°C displays when ove
n
turned on and is warming up to the selected
preheat temperature. Oven Preheating also
ashes when a cookin
g
condition can be started
programmed.
(example of 230°C shown)
READY 230°C
Ready 230°C displays when oven has reache
d
preheat temperature and is ready to cook. Rea
d
also ashes when a cooking condition can be
started or programmed.
(example of 230°C shown)
00:00
Displays cooking time. If stage cooking is
programmed, total cooking time is displayed.
MW 50%
MW 50% displays the current microwave pow
er
level. 100% is the hi
g
hest settin
g
, and 0% is low
(no microwave energy used).
(example of 50% sho
wn)
ITEM-05
ITEM-05 displays the single or double di
g
it ent
ry
of a pro
g
rammed cookin
g
condition when usin
g
a
programmed pad. (example of Item 05 shown)
STAGE 1
Stage 1 displays to show the sta
g
e number (1
throu
g
h 4) the oven is at in the cookin
g
conditio
n
STANDBY
STANDBY displays when oven is turned o, a
nd
also after the oven is plugged in, the door is
opened, and then shut.
Programming Display
DISPLAYS DESCRIPTION
Enter Program
to Add/Review:
Displays when oven is in pro
g
rammin
g
mode fo
r
single pad or double pad memory.
STAGE 1
Displays stage number during cooking or when
programming a specic cooking stage. Stage
number (1 through 4) indicates the stage that is
being used.