Datasheet

CA6 HOW TO ORDER
EXAMPLE: CA6XV2,5-10KA2020 SNP PI WT6030-BA-V0
CA6
1 - Series
X (Standard) M N
2 - Rotors
H2,5 V2,5 V5 VS5 HSMD VSMD
3 - Model and pitch
Through-hole SMD models
Bulk -standard- (blank)... (blank)…
T&R (Tape and reel) (N.A.)
(1)
-T&R
4 - Packaging
(1) N.A. - Not Available: Tape and Reel packaging is only available for VSMD model.
Standard (1000cycles) (leave blank)
Long life: LV + the number of cycles. ex: LV06 for 6000 cycles
(1)
LVXX: ex: LV06
8 - Operating life (cycles)
(1) Others on request.
At beginning of track, CCW: Off - On PCI
At end of track, CW: On - Off PCF
9 - Cut track
Without SNAP IN- (leave blank)
With SNAP IN P SNP
10 - Terminals (Crimped terminals or snap in:)
Lin - Linear A
Log - Logarithmic B
Antilog - Antilogarithmic C
- Special tapers have codes assigned: CODE YXXXXX
6 - Resistance law / taper
Please, indicate terminal position when ordering a special taper.
Series Rotor Model Packg Ohm value Taper Tol Life
1 2 3 4 5 6 7 8
CA6 X V2,5 -10K A 2020
Standard features
Dimensions: 6mm
Protection: IP 5 (dust proof)
Resistance: Carbon technology
Color: Blue housing with white rotor
Packaging: Bulk
Wiper position: at 50% ± 15º
Terminals: Snap in P strongly recommended
Marking: Resistive value marked on housing; others on request.
Standard confi guration
A drawing is requested to order a customized product. The code assigned will
include all special specifi cations.
Series, rotor, model and total resistive value are given before the special code:
CA6XV5-10K CODE C00111
Customized products
Track Terminals Housing Rotor Wiper position
9 10 11 12 13
SNP PI
Extra features
Assembly Ref # Color Flam.
14 15
WT 6030 -BA -V0
Assembled accessory
Through-hole SMD
Taper: Lin (A) Log (B), Antilog (C) Lin (A) Log (B), Antilog (C)
100 Ω / 100 1KΩ / 1K 100Ω / 100 1KΩ / 1K
Value Rn … / … … / … … / … … / …
5 MΩ / 5M 2,2 MΩ / 2M2 1 MΩ / 1 MΩ 1 MΩ / 1M
5 - Resistance value
Other resistive values available on request.
Through-hole models SMD models
100 Ω ≤ Rn ≤ 1MΩ: ±20% 2020
1 MΩ ≤ Rn ≤ 5MΩ: ±30% 3030
2525
For Rn > 5MΩ, tol : +50% - 30% 5030
Special tolerances available: <5% ... 10%, etc.
7 - Tolerance
Standard is blue (leave blank)
With other colors -See color chart below-, for example, red CJ-color; ex: CJ-RO
11 - Housing color
Standard is white (leave blank)
With other colors -See color chart below-, for example, red RT-color; ex: RT-RO
12 - Rotor color
20
|
www.acptechnologies.com
|
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de
Weltron Elektronik GmbH - Phone: [phone] Fax: [phone] E-Mail: [e-mail] Internet: www.weltron.de